Two Ram Tin Baler | Tin Can Baler | Scrap Baling Press for Sale

ENERPAT Two Ram Tin Baler

Built for tin scrap — tin cans, tinplate offcuts, solder dross, tin alloy turnings, shredded tin. This two ram tin baler packs material into dense, uniform bales. Less storage space. Lower transport cost per ton. Continuous automatic operation with anti‑springback design. A solid scrap baling press for sale that works as a tin can baler and a reliable non ferrous baler. The ENERPAT dual ram baler — made for tin recyclers and smelters.Built for tin scrap — tin cans, tinplate offcuts, solder dross, tin alloy turnings, shredded tin. This two ram tin baler packs material into dense, uniform bales. Less storage space. Lower transport cost per ton. Continuous automatic operation with anti‑springback design. A solid scrap baling press for sale that works as a tin can baler and a reliable non ferrous baler. The ENERPAT dual ram baler — made for tin recyclers and smelters.

現在地: エナパットホーム » Waste Baler » » Two Ram Tin Baler

ENERPAT Two Ram Tin Baler
Also called a scrap baling press for sale, tin can baler, non ferrous baler, or simply an dual ram baler.

If you’re processing high volumes of loose tin scrap — tin cans, tinplate offcuts, solder dross, tin alloy turnings, or shredded tin — you know how fast it eats up floor space. Low density means more truckloads, higher freight costs, and a yard that’s always crowded.

The ENERPAT Two Ram Tin Baler is built to handle exactly that. The dual‑ram system compresses loose tin into dense, stackable bales. Less spring‑back. Consistent output. Runs continuous with minimal babysitting. It’s what tin recyclers and smelters use when they want to move more tons per load and keep the yard flowing.

Get A Quote

ブリキベーラー

2つのラムベーラー

スクラップ梱包プレス販売用

ブリキ缶ベーラー

デュアルラムベーラー

Watch the ENERPAT Two Ram Tin Baler in action.

Key Challenges & ENERPAT Solutions

The ENERPAT Two Ram Tin Baler is built for real tin recycling yards. It takes loose tin scrap — tin cans, tinplate offcuts, solder dross, tin alloy turnings, shredded tin — and turns it into dense, stackable bales. Less mess. Lower freight cost. Consistent output.
Below are the common problems tin processors face, and how this two ram baler solves them.

Low Bulk Density Eats Up Your Yard and Trucking Budget
Loose tin scrap is light but bulky. Tin cans and solder dross take up space fast. You end up running more trucks than you should.
ENERPAT Solution – High‑Density Baling with a Two Ram Tin Baler
The tin baler uses a dual‑ram system to pack material tight. Higher density per bale means fewer loads. It’s a scrap baling press for sale that pays for itself in freight savings alone.
Inconsistent Bales Get Rejected or Downgraded
Tin and tin alloys tend to spring back after compression. Loose bales don’t stack well, and smelters don’t like them.
ENERPAT Solution – Stable Bale Formation with a Dual Ram Baler
Synchronized rams hold pressure long enough to kill spring‑back. The ENERPAT dual ram baler delivers uniform bale shape every cycle. Works as a tin can baler too — keeps those lightweight cans from falling apart.
Equipment That Can’t Keep Up With 24/7 Tin Processing
Tin scrap often runs in continuous shifts. If the press stops, your yard backs up.
ENERPAT Solution – Heavy‑Duty Design for Continuous Operation
Reinforced frame, industrial hydraulics. This two ram baler is made for long runs, not weekend repairs.
Irregular Tin Scrap Jams Single‑Ram Machines
Tinplate skeletons, solder chunks, fine turnings — they feed unevenly and cause hang‑ups in conventional presses.
ENERPAT Solution – Controlled Compression Chamber
The twin‑ram design guides material smoothly. No bridging. No sudden stops. One of the few non ferrous balers that handles mixed tin scrap without babysitting.
Too Much Manual Work Slows You Down
Old‑school balers need someone feeding, cycling, tying bales. That’s labor you don’t want to pay.
ENERPAT Solution – Fully Automated Recycling Baler
PLC control runs the cycle automatically. Load, press, eject. One operator watches the line. That’s what a modern scrap baling press for sale should do.
Spare Parts Delays Kill Your Production
When a seal or wear plate fails, waiting weeks for parts means lost revenue.
ENERPAT Solution – Global Support for the Two Ram Tin Baler
Key components — hydraulic seals, wear plates, control modules — are stocked and shipped fast. Keep your tin baler running, not sitting.

Material Testing

Built for tin scrap. Designed to bale. Engineered for high-volume.

With strong hydraulic pressing force, this two ram tin baler compacts loose tin scrap — tin cans, tinplate offcuts, solder dross, and tin alloy turnings — into dense, uniform bales. Less truckloads. Less yard clutter. A reliable scrap baling press for sale that works as a tin can baler and one of the toughest non ferrous balers out there. The ENERPAT dual ram baler — made for tin recyclers who want to move more tons per shift.

Request a Quote

Product Details

Reinforced Frame & Wear Protection

Built on a reinforced steel frame for continuous, high-volume tin scrap processing. Replaceable wear liners in high-impact zones reduce abrasion from sharp tinplate edges and solder dross. Makes this two ram tin baler last longer in real tin yards.
Dual-Ram High-Pressure Compression

The ENERPAT dual ram baler applies synchronized compression from both sides, with auxiliary pushing force to form tight, stable bales. No spring‑back. Consistent density. Exactly what a tin baler needs for mixed tin scrap — cans, offcuts, turnings, dross.
Smart PLC Control System

Siemens PLC with HMI touchscreen. Set it and forget it. Different tin grades? Switch programs in seconds. This two ram baler runs fully automatic with minimal operator input. A real scrap baling press for sale that doesn"t need babysitting.
Optimized Hydraulic Cycle Performance

Fast response, efficient hydraulics. Shorter cycle time without losing compression force. Keeps production moving when you"re processing high volumes of tin cans or tinplate scrap. Works great as a tin can baler too — light materials don"t slow it down.
Automated Baling & Ejection System

Compression, bale forming, and ejection — all in one continuous cycle. Flexible discharge direction fits your plant layout. Less manual handling. Better workflow. One of the most practical non ferrous balers for tin recyclers and smelters who want to move more tons per shift.

Technical Specifications

Two Ram Tin Baler

Model	Two-Ram Baler
Hopper Size (in)	79 × 59
Bale Opening Size (in)	71 × 59
Bale Size (in)	62 × 47 × 31
Cycle Time	≤15 seconds (empty)
Hydraulic Pressure (psi)	4061
Motor Power (hp)	73.8
Dimensions (in)	295 × 192 × 128
Main Ram Force (US tons)	163
Pusher Ram Force (US tons)	97
Door Lock Force (US tons)	47

Design Concept & Product Story

It rarely starts with someone searching for a two ram tin baler. It starts with tin scrap piling up faster than you can move it — yard space shrinking, trucks leaving half‑loaded because loose tin cans and solder dross won’t stay stacked.

That’s the reality behind the ENERPAT dual ram baler. We built it around what actually happens in a tin recycling yard: mixed tin scrap like tinplate offcuts, crushed tin cans, solder dross, tin alloy turnings, and shredded tin. Plus the real headaches — spring‑back, odd shapes jamming the chamber, and the pressure to keep running shift after shift.

So the machine became more than just a tin baler. Dual‑cylinder compression delivers balanced force. Siemens PLC runs fully automatic. The hydraulic system keeps cycles short and consistent. End result: loose tin scrap turns into dense, stackable bales. Call it a two ram baler, a tin can baler, or a solid scrap baling press for sale — it’s one of the most practical non ferrous balers for people who process tin every day.

Get A Quote

Customer Sites

Ready to turn loose tin scrap into dense, stackable bales?

Join tin recyclers and smelters that cut freight costs, get better value per ton, and run cleaner, more efficient yards. Get your ENERPAT Two Ram Tin Baler quote or request an on‑site engineering consultation.

Request a Quote

Why Choose Us

Global Installation & Support

We provide overseas installation guidance, commissioning, and operator training to get your two ram tin baler running fast. Spare parts and remote support keep your tin baler online with minimal downtime.
Twin-Ram Compression System

The ENERPAT dual ram baler delivers balanced compression for tin scrap — tin cans, offcuts, solder dross, and turnings — forming dense bales with reduced spring‑back and stable shape.
Certified Industrial Quality

Built under ISO and CE standards. Siemens PLC, Schneider electrics, durable seals. Reliable performance for continuous operation of your scrap baling press for sale.
Flexible Line Integration

Designed to connect with shredders, conveyors, and sorting systems. Smooth flow in tin processing lines — works as a tin can baler and one of the most adaptable non ferrous balers.

FAQ

Q1: What bale density can a two ram tin baler achieve, and will tin smelters accept it?

Bale density matters in tin trading. A two ram tin baler compacts loose tin scrap into dense, uniform bales with minimal air gaps — better stacking, less oxidation in the furnace. Smelters generally prefer properly formed bales from a tin baler as long as the scrap grade is clean. Under standards like GB/T 21180-2007, bale quality directly affects acceptance-20. Get the density right, and mills don"t push back.
Q2: What types of tin scrap can a two ram baler process?

A two ram baler handles compressible tin scrap — tin cans, tinplate offcuts, solder dross, tin alloy turnings, shredded tin. Not for solid tin ingots or heavy castings. Works as a tin can baler for lightweight material and as a non ferrous baler for mixed tin grades. If it bends under pressure, this machine bales it.
Q3: How does the machine handle spring-back in tin scrap?

Tin springs back. The ENERPAT dual ram baler applies synchronized compression from both sides, holding pressure long enough to kill rebound. The result: stable bales that don"t fall apart on the truck. This isn"t a single-ram press — it"s built for tin.
Q4: Is a tin baler difficult to maintain?

No. Routine maintenance is hydraulic oil, seals, and wear liners in high-contact zones. With proper operation, a tin baler runs predictable maintenance intervals — no surprises. Replaceable wear parts keep downtime short.
Q5: What kind of automation does this two ram tin baler use?

PLC-based control with Siemens hardware. Pre-set programs for different tin grades — switch materials, switch settings. Once configured, the two ram tin baler runs fully automatic with one operator watching the line. That"s what a modern scrap baling press for sale should do.
Q6: How many operators are required for this scrap baling press for sale?

Typically one. Depends on how you feed the line and your yard layout. In automated setups, the scrap baling press for sale integrates with conveyors and sorting systems — manual handling drops to near zero.
Q7: How much can transport efficiency improve after baling tin scrap?

Loose tin scrap hauls air. Dense bales from a tin baler increase payload per truck — fewer loads, lower freight cost. For a tin can baler handling lightweight cans, the difference is even bigger.
Q8: What regulations apply to tin scrap baling operations?

Tin scrap baling operations need to follow local environmental and safety rules — dust control, hydraulic fluid handling, and fire prevention. For export or cross‑border trade, you"ll need to meet smelter grading specs and contamination limits. Most regions also require proper documentation on scrap origin and tin content. Check your local rules before shipping baled tin.
Q9: What is the typical ROI of a two ram tin baler?

Depends on volume, freight savings, and labor cuts. Most tin recyclers see payback from fewer truckloads and reduced handling cycles. A two ram tin baler pays for itself faster when you"re moving high tons.
Q10: Can the non ferrous baler be integrated into a full recycling line?

Yes. The ENERPAT dual ram baler connects with shredders, conveyors, and sorting systems. Works as a tin baler in a continuous tin processing line — feed material in, get dense bales out. Flexible discharge orientation fits your layout.